Introduction of ZT-JTAR high production modified bitumen machinery for variety of asphalt with heating systerm
1. Product Description
Our plants has proven the most reliable solution for the preferred "wet-process" of rubber blending with many advantages over the competition.
With a capacity up to 25 tons per hour, ZT-JTAR is more than productive enough to provide adequate supplies. The container-size plant is compact and easily transported and offers flexible mix designs and recipes. It is equipped with a fast heat exchanger, which has high production efficiency, good mixing effect and strong pumping ability. It can be used to produce rubber asphalt, SBS modified asphalt, high viscosity modified asphalt, colored asphalt, and can be easily modified to produce hot poured sealant.
ZT-JTAR polymer modified bitumen plant often utilised by contractors who require especially durable mixes for highways, bridges, airports, viaducts and dense-traffic roads.
The equipment is used to produce modified asphalt, which consists of 1 pc of stirring tank, 2 pcs of reactors and 1 pcs of central control room. The asphalt modification process is controlled by industrial PLC, the production process is automated, dynamic real-time monitoring and display, and production records can be printed or searched at any time. The equipment has the characteristics of good quality of asphalt modification, accurate measurement, easy to operate. It is an ideal equipment for the construction of expressways, bridge decks, airports and urban trunk roads.
Technical Data
| ZT-JTAR Rubber Asphalt Production Equipment Data Sheet |
| Model |
ZT-JTAR-20 |
ZT-JTAR-25 |
| Production capacity |
15-20 Tons/hour |
20-25 Tons/hour |
| Drive mode |
Electric, total power ≤110kw, voltage 380v 50Hz |
Electric,total power ≤115kw, voltage 380v 50Hz |
| Composition |
1 mixing unit, 2 reaction unit, 1 central control unit |
| Total area |
100x100m |
| Application |
It can meet the production requirements of mixing equipment below 4000 |
It can meet the production requirements of two sets of mixing equipment below 3000 |
2. Features:
The following problems are common exist in rubber asphalt equipment on the market: The low metering accuracy of the material, the uneven mixing of the premixed tank, the insufficient heating capacity, the poor pumping ability of the rubber asphalt and stirring effect of the reactor, causing the rubber powder to precipitate or float, and affecting the quality of the rubber asphalt.
In response to the above problems, the development of Zhongtian brand rubber asphalt production equipment has the following characteristics;
1, The rubber powder has high measurement accuracy, small volume and fast feeding speed.
2, Low energy consumption, rapid heating capacity. It can raise temperature above 40 °C in ten seconds to increase equipment capacity.
3, With high stirring effect, no rubber powder floating and rubber asphalt segregation phenomenon.
4, Equipped with an electronic weighing system, high precision and high material ratio accuracy.
5, The use of high-viscosity rubber asphalt special pump, high power and long service life.
6, Independent research and development of viscosity meter, operator can achieve viscosity detection and data reading in the control room.
7, Suitable for a wide variety of asphalt, it can be used for SBS modified asphalt production, but also for the production of rubber modified asphalt and various high viscosity modified asphalt.
8, Simple operation, low management costs.
9, Stable operation, less trouble.
10, Cooperate with the National Research Institute of Highway Ministry of Transport, the Research Institute of PetroChina Fuel Oil Co., Ltd. and many universities to develop technology to ensure the latest and most advanced of the modified asphalt production technology and application technology, to ensure that our products are leading in the industry status.
11, In addition to the equipment requirements, we can also provide users with technical support for the formulation and production process of asphalt.
3. Company Information
Zhongtian is China's leading supplier of modified asphalt equipment and is committed to road project construction with core professional technologies, products and services.
Our extensive project implementation experience provides our customers with a full range of technical services from raw material selection, rubber asphalt production, quality control to mixing mix design.
4. Our Services
One-stop shopping and service, covering all your needs.
Contracted maintenance services and technician training provided by Zhongtian help protect your investment, while operator training ensures your team is able to utilise all the features and benefits built into your plant. When your needs change, Zhongtian offers retrofit options that can provide you with a good-as-new plant at a low cost.
Ready to start your project? Our team of industry-leading experts is standing by to help.
Audited Supplier 
){kind=link}